A technical schematic for a 6-channel Sallen Key High Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an MCP601T op-amp with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 100 Hz to 10 MHz.

SB090132025 – MCP601T-I/OT SALLEN KEY HIGH PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 6CH SALLENKEY HPF

SKU: SB090132025 Categories: ,
Primary IC

MCP601T-I/OT
IC Datasheet

https://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
Associated Hardware

HB090132025

Related products

A technical schematic for a 6-channel Active Wideband Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an MCP601T op-amp with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 100 Hz to 10 MHz.

Analog

SB090092025 – MCP601T-I/OT ACTIVE WIDE BAND PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 8CH ACTIVE BPF

A technical schematic for a 8-channel Active High Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an MCP601T op-amp with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 1 Hz to 10 MHz.

Analog

SB090082025 – MCP601T-I/OT ACTIVE HIGH PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 8CH ACTIVE HPF

A technical schematic for a 6-channel Sallen Key Low Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an MCP601T op-amp with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 100 Hz to 10 MHz.

Analog

SB090122025 – MCP601T-I/OT SALLEN KEY LOW PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 6CH SALLENKEY LPF

A technical schematic for a 6-channel Multiple Feedback High Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an MCP601T op-amp with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 100 Hz to 10 MHz.

Analog

SB090172025 – MCP601T-I/OT MULTIPLE FEEDBACK HIGH PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 6CH MFB HPF

A technical schematic for a 8-channel Passive Low Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an RC circuit with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 1 Hz to 10 MHz.

Analog

SB090012025 – PASSIVE LOW PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 8CH PASSIVE LPF

A technical schematic for a 8-channel Active Low Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an MCP601T op-amp with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 1 Hz to 10 MHz.

Analog

SB090072025 – MCP601T-I/OT ACTIVE LOW PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 8CH ACTIVE LPF

A technical schematic for a 6-channel Passive Wideband Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an RC circuit with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 1 Hz to 10 MHz.

Analog

SB090032025 – PASSIVE WIDEBAND PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 8CH PASSIVE BPF

A technical schematic for a 8-channel Passive High Pass Filter. The page features six identical active filter circuits arranged in two columns, labeled VIN1 through VIN6. Each circuit utilizes an RC circuit with varying capacitor and resistor values to achieve specific -3dB cutoff frequencies ranging from 1 Hz to 10 MHz.

Analog

SB090022025 – PASSIVE HIGH PASS FILTER SCHEMATIC BLOCK

MCP601T-I/OT — 8CH PASSIVE HPF